Supervising the traffic of vehicles during construction works is one of the most important points of traffic management. Vehicle incidents on construction sites must be prevented by effective traffic controller company operations during the building process in order to limit possible accidents. This is usually achieved thanks to careful planning, especially during the design stage of the project. In this article you will learn the features of road control as well as requirements for such a job.
What is traffic management?
The successful solution to the issues of ensuring traffic safety in sections of the road network in the work area, as well as ensuring the safety of road workers, drivers and pedestrians, largely depends on the traffic management system. Road works include construction, reconstruction, repair or maintenance of motor roads (streets), artificial structures, road drainage facilities, engineering facilities. There are several features of maintaining the road control:
- First of all, construction works can only be started after the complete arrangement of the work site with all the necessary temporary road signs, fences and signaling devices provided for in the approved schemes.
- Road signs must be installed in accordance with state requirements. It is mandatory to justify the installation of each sign, including those that introduce various restrictions. The total number of signs on a road section should be understandable as well as kept to a minimum. All these points are included in the duties of traffic control hire Sydney.
- Signs must be installed in such a way that they are visible to all road users at any time of the day, and the distance of their visibility during daylight hours would be at least 150 m.
Hence, traffic management is a crucial point of any construction project, since its main aim is to provide the safety of all road users.
Traffic control hire Sydney: what do you need to know?
Accidents can also occur due to a lack of training or inexperience of traffic controller company workers. Hence, road managment professionals must undergo trainings in special governmental bodies. There is a list of rules a traffic controller should know:
- Entrances and exits – allocate separate entrance and exit gates for pedestrians and vehicles;
- Walkways – provide a stable and level, well-drained footpath;
- Cross – create a clearly prescribed and illuminated point of traffic management system where drivers and pedestrians can clearly see each other;
- Obstacles – do not block passages so that pedestrians are forced to walk along the roadway;
- Barriers – the installation of barriers between the roadway and the sidewalk is a must.
- Lighting – drivers and pedestrians on shared routes have to see each other easily. Lighting may is essential at nighttime or in bad weather;
- Clothing – pedestrians at the construction site must wear brightly colored clothing;
- Minimization of vehicle traffic is made during the creation of traffic control project.
- Make sure all drivers and pedestrians know and understand the rules of traffic management on the construction site. Use standard traffic signs if necessary;
- Limiting the number of cars at the construction site to increase visibility;
- Providing parking for workers and visitors to the construction site;
- Control of the entrance to the working area.
Traffic control hire Sydney should take steps to ensure that all workers are fit to work in this sphere. Traffic controllers must be trained and authorized to perform the job, because they are responsible for lives of people!
